LX1100 6 Axle Frame Kit:

LX1100 Full Carbon Fiber Frame + 6 pcs B-CUBE 80A Brushless ESC + 3 Pairs 3K Carbon Fiber Propeller 2255  + 6 PCS 6215 170KV Motor  + PDB V3.0

LX1100 6 Axle

6215 170KV Motor （Support 6S-12S）

B-CUBE-Pro-80A-HV V3 ESC

B-CUBE-Pro-80A-HV V3 for Multicopter

Specification:

Voltage: 6-14S lithium battery. Current 80A. Weight 195g

Without BEC. Without fan (no need for fan)

Power cord (red and black line) No. 12 silicone wire, length: 14cm.

Motor line (3 black lines) No. 14 silicone wire, length: 70cm

Signal line (black and white line) Length: 25cm

Shell waterproof.

Model: B-CUBE-Pro-80A-HV V3 ESC

Drive mode: BLDC

Continues Current :80A

Instantaneous Current (10 seconds) : 100A

Output lithium battery Section number : 6-14s

Parameter Programming Features: Automatic angle (High / medium)

01 Warnings

 Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.

 Ensure all devices are well connected to prevent poor connection that may cause your multi-rotor to lose control or other unpredictable issues such

as damage to the device.

 Read through the manuals of all power devices and ensure the power configuration is rational before using this unit.

 Please use a soldering iron (ensuring it’s connected to a GND wire) with the power of at least 60W to solder all input/output wires and connectors.

 Stop using the ESC when its casing temperature exceeds 100℃, otherwise your ESC will get destroyed and may also get your motor damaged.

 Please swap any two ESC-to-motor wires if the motor runs in reverse.

02 Features

 Special core program for multi-rotor controllers greatly improves throttle response.

 Specially optimized software for excellent compatibility with multi-rotor motors.

 Microprocessor powered by independent DC regulator has better anti-interference performance greatly reduces the risk of losing control.

 Separate signal wires for reminding user of RPM output & error states.

 All settings except the timing are preset, making usage simple, high intelligent and adaptive.

 Compatible with various flight-controller and supports a signal frequency of up to 621Hz.

 DEO (Driving Efficiency Optimization) technology for better throttle linearity and higher driving efficiency.

 PWM frequency of 18KHz.

3 Pairs 3K Carbon Fiber 2255 Propeller

The new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installation

Using carbon content of 100% pure imported Toray carbon fiber 3K woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.

PDB V3.0