F4V3S F4 V3 V3S PLUS Flight Controller MARK5 5inch FPV Carbon Fiber Frame 225mm Built-in Barometer OSD RC FPV Racing Drone

F4V3S PLUS Flight Controller

 

Note : F4V3S PLUS uses a TYPEC USB port. Please ensure that you have a TYPEC USB cable that can communicate normally. Some USB cables can only be charged and cannot communicate data with flight control. If the USB cable you use cannot recognize the flight control USB port, it indicates that your USB cable cannot communicate with data normally. We upload firmware to the flight control through USB and conduct testing, so it can be very guaranteed that the USB port of the flight control is normal.

 

If you are unable to confirm if your USB cable is communicating properly, please purchase one.

 

Specification:

Item name: F4V3S PLUS Flight Controller

Firmware:OMNIBUSF4SD(AIRB)

USB Port: TYPE-C

Size: 36x36mm

Mounting holes: 30.5x30.5mm

STM32 F405 MCU

Dshot support

Drag and Drop OSD configured via Betaflight

MPU6500 6 axis SPI gyro & accelerometer

SBUS / PPM AND Spketrum DSMX ports

MicroSD card blackbox

Baro (BMP280)

5V3A 9V3A BEC

On-board video filters

Properties:

measured.

Boasting a F4 processor, on-board Betaflight OSD, MicroSD Black Box, 5v3a sbec, video filter, you'll be tuning PIDS with your transmitter and tear it to the track in no time!

Note ： F4V3S PLUS supports cleanflight ,betaflight and INAV firmware.

Package A:

F4V3S PLUS flight control+ MARK5 5inch FPV Frame + 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller

Package B:

F4V3S PLUS flight control+  MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller +FSI6AB remote control

Package C:

F4V3S PLUS flight control+PDB + MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller

Package D:

F4V3S PLUS flight control+PDB +  MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller +FSI6AB remote control

Package E:

F4V3S PLUS flight control+PDB + video transmitter + MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller

Package F:

F4V3S PLUS flight control+PDB + video transmitter + MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller+FSI6AB remote control

Package G:

F4V3S PLUS flight control+PDB + video transmitter + 1080p camera + MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller

Package H:

F4V3S PLUS flight control+PDB + video transmitter + 1080p camera + MARK5 5inch FPV Frame+ 4 BLHELI ESC + 4  2205  2300KV Motor + 2 pairs 5045 propeller +2  pairs 5045 3-brade propeller+FSI6AB remote control

MARK5 5inch FPV Carbon Fiber Frame 225mm

VTX5848 Item Specifics:
Item name: VTX5848 LITE FPV video transmitter
Input voltage: DC 7-27V
Input current: 3s or 4s battery, 600mW=360 MA±10MA
Output voltage: DC 5V 1A
Output power: 25/100/200/400/600mW switchable
Channel: 48CH
Frequency switch: manual button/OSD (simultaneous support)
Connector: MMCX
Size: 36x36x9mm
Mounting hole: 30.5x30.5mm, M3

Features:
-Stable output power, long transmission distance
-Fast 5-speed power switch, independent two red indicator, indicating the current output power 25/ 200/ 400/ 600MW
-Using 4(blue)*3(green) LED display 48 channel
-Support OSD signal remote frequency control, support PIT mode ( omW output power only can be open in OSD)
-With power filter
-Antenna using MMCX to SMA reducing the space
-Strong power chip, input up to 27V, output 5V/1A low ripple, less interference
-30.5mm*30.5mm mounting hole distance, suitable for CC3D, NAZE32, F3, F4, F7 flight controller

PDB

FPV Camera Item Specifics:
Sensor: 1/2. 7 800TVL CCD
Resolution: D1 1080P
Len: 5MP 2.1mm
Video formats: PAL / NTSC (OSD adjustable Internal)
Signal to noise ratio> 60Db (AGC OFF)
Electronic shutter: PAL: 1 / 50-100,000, NTSC: 1 / 60-100,000
Automatic gain control: YES
Backlight compensation: YES
Illumination intensity: 0.001Lux / 1.2F
Automatic gain control: adjustable
Backlight compensation: adjustable
Power: DC 5V-22V
Shell material: Aluminum alloy
Dimension: 28mm * 26mm * 28mm
Net Weight: 18g

Feature:
Upgraded Mista 800TVL 2.1mm Wide Angle HD 1080P CCD PAL/NTSC Switchable 16:9 OSD FPV Camera.