B-CUBE Pixhawk PX4 PIX PRO 32 Bit Flight Controller Autopilot with PM02 V3.2 Power Module (12S) Quadcopter Ardupilot

The product has passed strict CE certification. If you need a PDF or more complete test certificate, please leave a message.

PM02 V3.2 Power Module (12S) For PIXHAWK 6C 2.4.8 PX4 Ardupilot

PM02 V3.2 PDB Power Module
Description:

This PM02 Power Module provides a simple way to supply regulated 5.2V to flight controller from the battery while providing current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable. It comes with pre-soldered wires, capacitor, and XT60 connector on both ends, along with shrink tubing on the PCBA for physical protection.

Specification:

Input Voltage: 2S-12S

PCB Cont. Current Rating: 60A

PCB Burst Current Rating: 100A (<60 Sec)

Max Current Sensing: 120A

Output: DC 5.2V & 3A Max

Voltage Divider: 18.182

Amperes per Volt: 36.364

Weight: 20g

Please Note:

• The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference.