Pixracer R15 Autopilot xracer PX4 Pixhawk Flight Controller For FPV Racing RC Drone Quadcopter Multicopter Multirotor

Pixracer R15 Autopilot xracer PX4  Flight Controller

 

If you do not have GH1.25 3DR Power Module ,please selectR15 standard Set Package.

 

Note: Pixracer must be powered by Power Module, and ESC with BEC cannot be used to power pixracer,Because the circuit board is designed like this. So please use 3DR Power Module for power supply.

 

R15 Simple Set Package Included:
Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

 

 

R15 standard Set Package Included:
Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

3DR Power Module x1

 

ThePixraceris the common name for the FMUv4 generation of Pixhawk autopilots. It has been designed primarily for the demanding requirements of small multicopters, but of course can be used on planes and other vehicles which require no more than 6 pwm outputs for controlling escs and motors.

 

Many people will mistakenly believe that the PixRacer is just a standard "racer" controller that lacks many of the functionalities of a complete autopilot system. Well, don't be fooled! PixRacer has all the capabilities of the original PixHawk -including version 2- and even more! But is optimized in size and has just about the right amount of input/outputs that allows you to switch from a full enriched autopilot stack system -with autolanding and full navigation- to a high-performance racing platform. Yup, if you get tired of advanced waypoints, then flip the switch and race like a pro! R15 has an updated accelerometer/gyroscope, magnetometer and ROHS (Lead Free).
Includes an ESP8266 for easy WiFi Updates. Comes with the latest Ardupilot ESP8266 firmware developed by Andrew Tridge. This new firmware has a nice web interface, MavLink2 support and an easier way to do future updates via the web interface.

Interfaces/Connectivity

• Wifi: ESP-01 802.11bgn Flashed with MavESP8266

• MicroSD card reader

• Micro USB

• RGB LED

• GPS (serial + I2C)

• TELEM1/TELEM2

• Wifi serial

• FrSky Telemetry serial

• Debug connector (serial + SWD)

• Connectors: GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 (TxD, RxD, CTS, RTS), USART2 (TxD, RxD, CTS, RTS), FRSky-IN, FRSky-OUT, CAN, USART8 (TxD, RxD), ESP8266 (full set), SERVO1-SERVO6, USART7 (TxD, RxD), JTAG (SWDIO, SWCLK), POWER-BRICK (VDD, Voltage, Current, GND), BUZZER-LED_BUTTON.

Power System:

5-5.5VDC from USB or PowerBrick connector. Optional/recommendedACSP4 +5V/+12V Power Supply.

Weight and Dimensions:
Weight: 10.54g (.37 oz)
Width: 36mm (1.42”)
Length: 36mm (1.42”)

 

R15 7M GPS Package:

Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

3DR Power Module x1

7M GPS

 

R15 7M GPS Set Package:

Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

3DR Power Module x1

7M GPS

GPS Holder

Shock Absorber

 

R15 M8N GPS Package:

Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

3DR Power Module x1

M8N GPS

 

R15 M8N GPS Set Package:

Pixracer R15 Flight controller  x 1
Plastic  shell x 1
Safety switcher  and Buzzer  x 1
Micro4G TFCard  x 1

Card reader  x1
Cables set (GH1.25 6P Line+GH1.25 4P Line + GH1.25 5P Line)  x1

ESP8266 Wifi module x 1

3DR Power Module x1

M8N GPS

GPS Holder

Shock Absorber