Zu Produktinformationen springen
1 von 3

B-CUBE.RC - Build Your Drone From here- Build Your Drone From here!

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RGB RC Quadcopter Ardupilot

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RGB RC Quadcopter Ardupilot

Normaler Preis $72.57 USD
Normaler Preis $72.57 USD Verkaufspreis $72.57 USD
Sale Ausverkauft
Color

The product has passed strict CE certification. If you need a PDF or more complete test certificate, please leave a message.

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
 
Features:
Pixhawk 2.4.8 support the latest official ardupilot firmware and PX4 firmware.
1. The advanced 32-bit ARM CortexM4 high-performance processors(2MB flash), can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
 
Specifications:
 
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
 

WIFI V1.0 and V2.0 use 8bit CPU, only support UDP
WIFI V3.0 use 32 BIT CPU, support TCP and UDP.
WIFI V2.0 and V3.0 use external antenna (5DB)

 

If the package includes the 3DR Power Module, the current hardware of the 3DR Power Module has been fully upgraded. Previously, it only supported a maximum of 6S, but now it supports a maximum of 12S. By default, XT60 plug is sent. If XT90 plug is required, please leave a message.

M10 GPS Overview

The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.

It also comes with the IST8310 compass.This module ships with a baud rate of 115200 5Hz.

The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.

Firmware Support for M10 GPS:

  • PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.

    Specification

     

    M10 GPS

    M9N GPS

    GNSS Receiver

    Ublox M10

    Ublox M9N

    Number of Concurrent GNSS

    Up to 4 GNSS

    Up to 4 GNSS

    BeiDou

    BeiDou

    Galileo

    Galileo

    GLONASS

    GLONASS

    GPS

    GPS

    QZSS

    QZSS

    Frequency Band

    GPS L1

    GPS L1

    Galileo E1

    Galileo E1

    GLONASS L1

    GLONASS L1

    BeiDou B1

    BeiDou B1

    SBAS L1

    SBAS L1

    QZSS L1

    QZSS L1

    Compass

    IST8310

    IST8310

    Output Protocol

    UBX (U-blox)

    UBX (U-blox)

    NMEA

    NMEA

    Accuracy

    2.0m CEP

    1.5m CEP

    Nav. Update Rate

    Up to 25 Hz (single GNSS),

    Up to 25 Hz (4 concerrent GNSS)

    Up to 10 Hz (4 concurrent GNSS)

    GNSS Augmentation System

    EGNOS, GAGAN, MSAS and WAAS

    EGNOS, GAGAN, MSAS and WAAS

    QZSS: L1S

    QZSS: L1S

    Default Baud Rate

    115200

    115200

    Input Voltage

    4.7-5.2V

    4.7-5.2V

    Port Type

    CH-6P

    CH-6P

    Antenna

    25 x 25 x 4 mm ceramic patch antenna

    25 x 25 x 4 mm ceramic patch antenna

    Power consumption

    Less than 200mA @ 5V

    Less than 200mA @ 5V

    Operating Temperature

    -40~80C

    -40~80C

    Dimension

    φ50 x14.4 mm

    φ50 x14.4 mm

    Weight

    32g

    32g

    Cable Length

    26cm (42cm cable purchase separately)

    26cm (42cm cable purchase separately)

 

 

Vollständige Details anzeigen

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)