1 5

B-CUBE.RC - Build Your Drone From here- Build Your Drone From here!

LX1100 Full Carbon Fiber 1100mm Hexa-Rotor Frame X-Roter 80A ESC PX4 Pixhawk 2.4.8 6C PRO Flight Control Set 6215 Motor

LX1100 Full Carbon Fiber 1100mm Hexa-Rotor Frame X-Roter 80A ESC PX4 Pixhawk 2.4.8 6C PRO Flight Control Set 6215 Motor

$989.45 USD
$989.45 USD $989.45 USD
Sale Ausverkauft
Color

RCtoSky LX1100 6 Axle Hexacopter

Features：

1. Simple folding parts, one-key folding, saving time and effort;

2. The super-large motor base can be built-in ESC to solve the messy wiring on the center board.

3.  2.0MM carbon fiber hollow design center board, saving time for disassembly and assembly.

4. Intelligent electric tripod, remote control one-key contraction, making the flight more beautiful.

Parameters：

Symmetrical motor wheelbase: 1100MM

Arm diameter: 25MM

LX1100 6 Axle Package can lift 10KG(use 6S or 12S Battery)
 

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
 
Features:
Pixhawk 2.4.8 support the latest official ardupilot firmware and PX4 firmware.
1. The advanced 32-bit ARM CortexM4 high-performance processors(2MB flash), can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
 
Specifications:
 
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface


 

PIXHAWK 6C PRO

 

Build-in Buzzer,Build-in RGB LED,support Independent external Safety Button,With Plastic Case

 

Technical Specification

Processors & Sensors

  • FMU Processor: STM32H743
    32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM

  • IO Processor: STM32F103
    32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM

On-board sensors

  • Accel/Gyro: ICM-42688-P

  • Accel/Gyro: BMI055

  • Mag: IST8310

  • Barometer: MS5611

  •  

PIXHAWK 2.4.8 Package include:

LX1100 Full Carbon Fiber+ 6 pcs XRtor 80A Brushless ESC+

3 Pairs 3K Carbon Fiber Propeller 2255  + 6 PCS 6215 170KV Motor  +

PIXHAWK 2.4.8 Flight Control + 4G TF Card + Safety Button + Buzzer + PPM Encoder +OLED Module+RGB LED+I2C Expansion Board+ 3 Line(4Pin 1.25 ,6Pin 1.25 ,3Pin 2.5.4) + M8N GPS+ GPS Holder+
PM02 Power Module(support 12S) + Shock Absorber +
433MHZ 1000MW 3DR Radio Telemetry V5
(If you need 915MHZ, please leave a message)
 
PIXHAWK 6C PRO Package include:
 
LX1100 Full Carbon Fiber+ 6 pcs XRtor 80A Brushless ESC+

3 Pairs 3K Carbon Fiber Propeller 2255  + 6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO + 2*PWM Module+I2C Expansion Board + RGB LED Module+
Safety Button+4G TF Card+M8N GPS+GPS Holder+Shock Absorber+PM02
Power Module(support 12S) +
433MHZ 1000MW 3DR Radio Telemetry V6
(If you need 915MHZ, please leave a message)
 

 

 

 

 

 

 

 

 

 

 

 

 


6215 170KV Motor （Support 6S-12S）

 

 

 

 

 

Hobbywing XRotor pro 80A HV V3 ESC

XRotor-Pro-80A-HV V3 for Multicopter
Specification:
Voltage: 6-14S lithium battery. Current 80A. Weight 195g
Without BEC. Without fan (no need for fan)
Power cord (red and black line) No. 12 silicone wire, length: 14cm.
Motor line (3 black lines) No. 14 silicone wire, length: 95cm
Signal line (black and white line) Length: 40cm
Shell waterproof.
Model: XRotor Pro-80A-HV-RTF-V3
Drive mode: BLDC
Continues Current :80A
Instantaneous Current (10 seconds) : 100A
Output lithium battery Section number : 6-14s
Parameter Programming Features: Automatic angle (High / medium)

 

 

3 Pairs 3K Carbon Fiber Propeller

 
The new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installation
Using carbon content of 100% pure imported Toray carbon fiber 3K woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.
 

 

 

Radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.

 
 
 

OLED Module can display some message.

Radio Telemetry V6

 

 

 

PM02 Power Module

  • Input Voltage: 2S-12S

  • PCB Cont. Current Rating: 60A

  • PCB Burst Current Rating: 100A (<60 Sec)

  • Max Current Sensing: 120A

  • Output: DC 5.2V & 3A Max

  • Voltage Divider: 18.182

  • Amperes per Volt: 36.364 

Description:

This PM02 Power Module provides a simple way to supply regulated 5.2V to flight controller from the battery while providing current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable. It comes with pre-soldered wires, capacitor, and XT60 connector on both ends, along with shrink tubing on the PCBA for physical protection.

 


Vollständige Details anzeigen

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)