RCtoSky LX1100 6Axle Hexacopter

Features

1. Simple folding parts, one-key folding, saving time and effort;

2. The super-large motor base can be built-in ESC to solve the messy wiring on the center board.

3.  2.0MM carbon fiber hollow design center board, saving time for disassembly and assembly.

4. Intelligent electric tripod, remote control one-key contraction, making the flight more beautiful.

Parameters

Symmetrical motor wheelbase: 1100MM

Arm diameter: 25MM

PIXHAWK 6C PRO
 

Key Design Points

• High performance STM32H743 Processor with more computing power & RAM

• Build-in Buzzer,Build-in RGB LED,support Independent external Safety Button,With Plastic Case

• New cost-effective design with low-profile form factor

• Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings

• IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUS

Technical Specification

Processors & Sensors

• FMU Processor: STM32H743
  32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM

• IO Processor: STM32F103
  32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM

On-board sensors

• Accel/Gyro: ICM-42688-P

• Accel/Gyro: BMI055

• Mag: IST8310

• Barometer: MS5611

Electrical data

Voltage Ratings:

• Max input voltage: 6V

• USB Power Input: 4.75~5.25V

• Servo Rail Input: 0~36V

Current Ratings:

• TELEM1 Max output current limiter: 1.5A

• All other port combined output current limiter: 1.5A

Mechanical data

• Dimensions: 85 * 45 * 10 mm

• Weight (Plastic Case) : 33g

Simple collocation:

Simple Package:

3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO(white or black shell)+2'PWM Module+Safety Button+4G TF Card+M8N GPS+GPS Holder

+Shock Absorber+PM02 V3.2 Power Modulo(support 12S)

High Pacage:

3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C Expansion Board +RGB LED Module+ Safety Button+4G TF Card+M8N GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S) 

3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO(white or black shell)+2*PWM Module+ Safety Button+4G TF Card M8N GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module (support 12S)+Radio Telemetry V6 433/M915HZ 100MW

433/915MHZ 500MW :

3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C ExpansIon Board +RGB LED Module+Safety Button+4GTF Card+M8N GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S)+Radio Telemetr V6 433/915MHZ 500MW

433/915MHZ 1000MW :

LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+

3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor  +

PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C Expansion Board+RGB LED Module+ Safety Button+4G TF Card+M8N GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S)+Radio Telemetry V6 433/915MHZ 1000MW

M8N GPS:

LX1100 6Axle

6215 170KV Motor （Support 6S-12S）

B-CUBE-Pro-80A-HV V3 ESC

B-CUBE-Pro-80A-HV V3 for Multicopter

Specification:

Voltage: 6-14S lithium battery. Current 80A. Weight 195g

Without BEC. Without fan (no need for fan)

Power cord (red and black line) No. 12 silicone wire, length: 14cm.

Motor line (3 black lines) No. 14 silicone wire, length: 70cm

Signal line (black and white line) Length: 25cm

Shell waterproof.

Model: B-CUBE-Pro-80A-HV V3 ESC

Drive mode: BLDC

Continues Current :80A

Instantaneous Current (10 seconds) : 100A

Output lithium battery Section number : 6-14s

Parameter Programming Features: Automatic angle (High / medium)

01 Warnings

 Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.

 Ensure all devices are well connected to prevent poor connection that may cause your multi-rotor to lose control or other unpredictable issues such

as damage to the device.

 Read through the manuals of all power devices and ensure the power configuration is rational before using this unit.

 Please use a soldering iron (ensuring it’s connected to a GND wire) with the power of at least 60W to solder all input/output wires and connectors.

 Stop using the ESC when its casing temperature exceeds 100℃, otherwise your ESC will get destroyed and may also get your motor damaged.

 Please swap any two ESC-to-motor wires if the motor runs in reverse.

02 Features

 Special core program for multi-rotor controllers greatly improves throttle response.

 Specially optimized software for excellent compatibility with multi-rotor motors.

 Microprocessor powered by independent DC regulator has better anti-interference performance greatly reduces the risk of losing control.

 Separate signal wires for reminding user of RPM output & error states.

 All settings except the timing are preset, making usage simple, high intelligent and adaptive.

 Compatible with various flight-controller and supports a signal frequency of up to 621Hz.

 DEO (Driving Efficiency Optimization) technology for better throttle linearity and higher driving efficiency.

 PWM frequency of 18KHz.

3 Pairs 3K Carbon Fiber Propeller

The new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installation

Using carbon content of 100% pure imported Toray carbon fiber 3K woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.

Radio Telemetry V6: