3-Axis Brushless Gimbal Mount
Description:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls,easy to adjust
- Compatible with Gopro 4,3,2,1
- Onboard gyro and acceleration sensor MPU6050
- With 2pcs 2206 100t, 1pcs 2805 100t motor
- With 32bit Storm32 firmware gimbal controller, sensor
- With motor protector which can help heat dissipation
Specification:
- Hardware : Storm32BGC
- Hardware Version: V1.32
- Firmware: o323bgc-release-v096
- Power supply: 9-15V(3S-4S),Recommended 12V
- Drive current: Max.1.5A
- Height: 11cm
- Weight:180g
- Color: White or Black
Function:
1.Can control the pitch by a receiver or other individual PWM channels.
2.Can set the following mode or lock mode.
3.Can set the angle mode or speed mode.
Software:
Download the GUI software from here,
https://github.com/olliw42/storm32bgc/blob/master/firmware%20binaries%20%26%20gui/o323bgc-release-v096-v20160319.zip
How to install:
1.Remove vibration ball, open at the mounting plate.
2.Lock mounting plate with screws at the bottom of the craft.
3.Install the shock absorber ball.
4.Install the camera with a belt style compact camera.
Note:
Install the camera (be sure to install the camera properly, otherwise it will shake), power on the gimbal and stabilize it for above 30 seconds ,do not shake the gimbal, keep it hanging,do not touch the camera with hands, keep it suspended. After hearing the sound, it can be used normally.
