News

B-CUBE ESP-Drone

Introduction ESP-Drone is an open source solution based on Espressif ESP32/ESP32-S2 Wi-Fi chip, which can be controlled by a mobile APP or gamepad over Wi-Fi connection. ESP-Drone comes with simple hardware, clear and extensible code...

B-CUBE BLHELI ESC

Thank you for purchasing BLHeli ESC, please read this manual carefully before you use the ESC and strictly follow the instructions. B- CUBE accepts no liability for damage(s) or injuries...

B-CUBE Mission Planning

This section contains articles about creating missions that will run when the vehicle switched to AUTO mode. Note The instructions focus on the Mission Planner but the main concepts apply to other Ground Control Stations as...

B-CUBE PX4:How to fix “Avionics power low: 4.78 V”

Set the parameter CBRK_SUPPLY_CHK to the maximum value 894281. Then reboot PIXHAWK.

B-CUBE PIXHAWK How to Connect ESCs and Motors

This article explains how to connect the ESCs, motors and propellers to a autopilot. The Pixhawk is used as an example but other autopilots are connected in a similar way....

B-CUBE 450 FRAME Wheelbase 4-Axle Frame Support...

Please note that the screws of the motor should not touch the copper wires inside the motor, otherwise, the motor may be overloaded and burn out the motor and ESC...