News

B-CUBE QGroundControl: Power redundancy not met...

change COM_POWER_COUNT from 1 to 0.Then save and reboot.

B-CUBE Why can 500MW or 1000MW radio telemetry ...

Some people buy 500MW or 1000MW radio telemetry, but only can see 100MW(20db) configuration Because radio telemetry use Sik firmware. Sik is open souce code,It is based on si1000 chip....

B-CUBE How to upload inav firmware for F4V3S & ...

1.Download INAV-Configurator from here :https://github.com/iNavFlight/inav-configurator/releases 2.Press the button for F4V3S,and then insert the micro USB line until to see the DFU port. 3.Select OMNIBUSF4V3 , enable “No reboot sequence” ,”Full chip erase”,...

B-CUBE How to use M8N GPS for APM2.8?

M8N GPS includes GPS satellite search and compass. GPS satellite search must go to an outdoor open place. It may not be possible to search satellites indoors due to poor...

B-CUBE Ardupilot How to Connect ESCs and Motors

This article explains how to connect the ESCs, motors and propellers to a autopilot. The Pixhawk is used as an example but other autopilots are connected in a similar way....

B-CUBE Barometer (external)

Link from https://ardupilot.org/copter/docs/common-baro-external.html Most autopilots include a barometer directly on the autopilot but attaching an external barometer can be useful in order to place the barometer away from air pressure disturbances....